EasyManua.ls Logo

KVH Industries TracVision G4 User Manual

KVH Industries TracVision G4
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Satellite Television
KVHTracVision
®
G4
technical
manual
Installation
Configuration
Maintenance
A Guide to TracVision G4

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the KVH Industries TracVision G4 and is the answer not in the manual?

KVH Industries TracVision G4 Specifications

General IconGeneral
Operating Temperature-25°C to +55°C
Maximum Wind Speed Survival100 knots
TypeSatellite TV Antenna
Tracking TechnologyDigital
PolarizationLinear
Elevation Range10° to 80°
Frequency Range10.7-12.75 GHz
Maximum Wind Speed Operational50 knots
HumidityUp to 100%
CompatibilityDIRECTV, DISH Network

Summary

Installation

Planning the Installation

Discusses who should install the system and lists the necessary tools and materials for installation.

Mounting the TracVision Antenna

Provides step-by-step instructions for mounting the TracVision antenna unit at the chosen location.

Mounting the GyroTrac Sensor

Details how to mount the GyroTrac sensor module, including options for horizontal and vertical surfaces.

Mounting the ADCU

Explains the two options for mounting the Advanced Digital Control Unit (ADCU): Velcro fastening or flush-mounting.

Wiring the ADCU

Details connecting all system wires to the ADCU's rear panel terminal strip connectors.

Using the ADCU Interface

Troubleshooting

Troubleshooting Matrix

Identifies trouble symptoms, their possible causes, and references to troubleshooting solutions.

Causes and Remedies for Common Operational Issues

Addresses common operational issues such as blown fuses, low power, and improper wiring.

Maintenance

Replacing the Main PCB or Fuses

Details how to remove the PCB cover and replace the main PCB or fuses within the antenna unit.

Replacing the RF PCB

Provides step-by-step instructions for removing and replacing the RF PCB.

Replacing the Antenna Gyro Assembly

Details how to disconnect and replace the antenna gyro assembly.

Replacing the Elevation Motor or Belt

Explains how to replace the elevation motor and drive belt, including tension adjustments.

Replacing the LNB

Provides instructions for replacing the North American and European LNB assemblies.

Related product manuals