TracVision TV5 User’s Guide
84
Troubleshooting
Adjust the LNB Skew Angle (Linear Systems Only)
If your antenna is not equipped with automatic skew, you need to
manually set the antenna’s LNB to the correct skew angle for the
selected satellite and your current location. Refer to “Adjusting the
LNB Skew Angle (Linear Only)” on page 27 for details.
Restart the System
Try restarting the system at the web interface (see “Restarting the
System” on page 109). If you cannot access the web interface, turn off
the TV-Hub at the rear panel power switch, then turn it back on.
To Next Page
Loading...
Need help?
General
