11
CONTROLS & FEATURES
3
1
KEYLESS CONTROLLER Theft Prevention
Setting – Remote Sensing (Unlock)
1. Press the starter button for 1 second, and the
decorative cap of the Main Switch will light up in
blue, accompanied with 2 short beeps. Turn the
knob to ON, now the engine is allowed to start.
Blue light on constantly.
2. When the power of Remote Control is weak or
the surrounding is obstructive ,unlocking cannot
be triggered, you may use short-range sensing by
putting the Remote Control against the circular
mark on the Front Inner Box ,and operate just like
the remote mode.
1
2
3
Short Range Sensor
Starter Button
Short range Sensing (Locking/Unlock)
When the power of the Remote Control
is weak or the surroundings are
obstructive, Locking cannot be triggered.
Put the Remote Control against the
circular mark on the Front Inner Box 。
Operate just like Remote Sensing
1
2
1
CAUTION
˙ Lock/unlock can only be triggered on or
˙It is strongly recommended that the user use
Remote Sensing (Locking) mode to activate the
Theft Prevention function.
˙In case the KEYLESS main switch failed to
operate in remote mode, try replacing battery of
the remote controller with a new one or use short
range sensing to unlock you scooter.
To Next Page