EasyManua.ls Logo

KYMCO AGILITY300 - Storage

KYMCO AGILITY300
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
MAINTENANCE
Take necessary steps to be in good condition
for next use after long storage.
P e r f o r m a n y n e c e s s a r y p e r i o d i c
maintenance or repairs before storage
Exchange new oil after warming up the
engine.
Empty the fuel tank and make sure no fuel
remaining by idling until the engine stalls.
Remove the battery and keep from direct
sunlight or freezing temperature, it's better to
do a slow charge once a month.
Wash and dry the vehicle thoroughly
Apply corrosion inhibitor to all unpainted
metal.
Inflate all tires to the rated pressure and put
the bwheel stands to raise tires off the
ground.
Cover the vehicle, store indoors and keep
dry.
Storage
Removal from Storage
Remove cover from the vehicle
Check the battery voltage or charge it if
necessary, and then install it in the vehicle.
Fill the fuel tank with fuel.
Check all the points listed in the Pre-ride
Inspection section.
WARNING
Gasoline is easily flammable and
explosive. It's possible to get burned,
even seriously injured when fueling with
carelessness.
Stop the engine and keep away from any
heat source, spark fire, and flames.
Be sure to add fuel outdoors and wipe
the spill up at once.

Related product manuals