EasyManua.ls Logo

KYMCO AGILITY300 - Tires Inspection

KYMCO AGILITY300
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
55
Tire wear changes the tire profile and may
affect the vehicle's handling characteristics.
Check the tire condition before each riding.
Replace the tires if tread depth is less than
the following limit:
Tire tread wear limit: FRONT 1.6 mm
REAR 2.0 mm
Tires Inspection
WARNING
An improperly repaired, installed, or
balanced tire can cause you to lose
control of your scooter or shorten tire life.
Ask the authorized KYMCO dealer, or a
qualified tire shop to perform tire repair,
replacement, and balancing due to the
proper tools and experience are required.
Always install tires according to the
rotation direction shown by arrow on the
sidewall of each tire.
NOTE: Measure the tread depth , do not
judge by a visual inspection.
NOTE: Be sure to balance the wheel after repairing
a puncture or the tire. Proper wheel balance is
important to avoid variable contact between tire and
ground, and to avoid uneven tire wear.
NOTE: Replace the tires if there's visual evidence
of damage as cracks or cuts.
1
1

Related product manuals