KYMCO AGILITY300 User Manual

WARNING
To avoid damage from the electronic fuel injection system, do not remove or install the
battery when the ignition switch is in the " " position.
The long-term storage of the vehicle could cause fuel and engine oil deterioration and
probably get into a non-start situation.
Service more frequently when operating in severe conditions such as dusty area, high
speed riding, frequent start and stop or extreme riding habit.
Make sure to keep away from any flammable materials such as dry grasses or leaves,
avoid them in contact with the exhaust pipe or muffler when parking the vehicle.

KYMCO AGILITY300 Specifications

Capacities

engine oil capacity (exchange)	0.9 L
transmission oil capacity (exchange)	0.18 L
fuel tank capacity	13 L
maximum weight capacity	341 kg

Engine Specifications

engine type	Four-stroke, air-cooled OHC
engine displacement	276 cc
bore and stroke	72.7 X 66.4 mm
compression ratio	10.6:1
max horsepower	16.8 KW/7500 rpm
max torque	23.5 Nm/6500 rpm
spark plug	DPR6EA-9
idle speed	1700±100 RPM
cooling system	Cooling water
starting system	Electric starter motor

Chassis

tire size, front	110/70–16
tire size, rear	140/70–14
brake, front	DISK(ABS)
brake, rear	DISK(ABS)

Electrical

ignition type	ECU
battery	12v 10Ah
headlight	12v/8w/6w
tail light	12v 4w
brake light	12v 6w
turn signal light	12v 10w 2
license plate light	12V 5w
position light	12v 5w(F)12v 1w(B)
fuses	30A 1, 25A 1, 15A 2, 10A*2

Weight and Dimensions

overall length	2200 mm
overall width	765 mm
overall height	1560 mm
wheel base	1550 mm
seat height	800 mm
curb weight	191 kg

Summary

Identification Numbers Record

Vehicle Identification Number (VIN)

Record the VIN for reference to assist in ordering parts or in case of theft.

Engine Serial Number (ESN)

Record the ESN for reference to assist in ordering parts or in case of theft.

Section 1 - Forward & Safety Introduction

Scooter Safety Guidelines

Essential safety precautions and guidelines for operating the scooter.

Accessories & Modification Policy

Section 2 - Controls & Features

Location of Parts & Controls

KEYLESS System Operation

Explains the operation and features of the KEYLESS remote control and ignition system.

Instruments and Indicators Overview

Details the dashboard instruments, warning lights, and indicators.

Handlebar Switches Functions

Fueling and Fuel Recommendations

Suspension and Side Stand Features

Section 3 - Operation

Pre-ride Inspection Checklist

Checklist for essential checks before riding the scooter.

Break-in Period Guidelines

Guidelines for the initial break-in period to ensure optimal performance and life.

Engine Starting Procedure

Step-by-step instructions for safely starting the scooter's engine.

Riding and Parking Techniques

Proper techniques for riding, accelerating, braking, and parking the scooter.

ABS System Operation Explained

Section 4 - Maintenance

Importance of Regular Maintenance

Highlights the necessity of regular maintenance for safety, economy, and longevity.

Comprehensive Maintenance Schedule

Outlines the recommended maintenance tasks and intervals for the scooter.

Engine Oil Management Procedures

Transmission Gear Oil Change

Brake Fluid and Pad Inspection

Battery and Fuse Servicing

Tire Care and Inspection

Coolant Level and Replacement