CONTROLS & FEATURES
Suspension
Each shock absorber on your scooter has 5
spring preload adjustment positions for
different load or riding conditions.
Use a fitting wrench to turn the adjuster's
boss .
Position 1 is for light loads and smooth road
conditions.
Position 3 to 5 increase spring preload for a
more stiff rear suspension and can be used
under heavy loading.
3
4
5
6
ā NOTE: Always adjust the shock absorber
pre-load position in sequence (1-2-3-4-5 or
5-4-3-2-1).
Attempting to adjust directly from 1 to 5 or 5
to 1 may damage the shock absorber.
Standard spring preload position: 3
1
1
WARNING
B e c e r t a i n t o a d j u s t b o t h s h o c k
absorbers to the same spring preload
positions.
Improper setting of shock absorber will
cause unstable handling and might
lead to an accident..
31
To Next Page
Loading...
