CONTROLS & FEATURES
Ser vice Indicator Reset(noodoe model):
After you change the engine oil or , you need
to reset the Service Indicator.
1. Push MODE button, the multifunction
display will change (ODO→Trip→Oil Belt )
repeatedly in sequence.
2. Choose Oil service mode press
MODE button and ADJ button at the same
time for 2 seconds and the display will turn
to 0.0,the service indicator is reset.
3. The service indicator will be on again
when you reach next 3000km (oil service)
or
Belt
→
or Belt
20000km(Belt service).
Ser vice Indicator Reset:
After you change the engine oil , you need to reset
the Service Indicator.
1. Push MODE button, the multifunction
display will change ODO→Trip→Empty display
( Service Mode ) repeatedly in sequence.
2. Choose Oil service mode press MODE button
and ADJ button at the same time for 2 seconds
and the display will turn to 0.0,the service
indicator is reset.
NOTE: When the Service indicator is on, the
ODO/Trip and mileage number will flash.
21
To Next Page