OPERATION
5
6
. Squeeze the left (rear) brake lever to connect
. Press the starter button with the throttle
closed, releases it at once as the engine starts.
7. Keep the throttle closed while warming up the
engine.
8. Keep the engine warming up thoroughly before
each ride.
NOTE: If starting is difficult, release the Start Button and
wait for a few seconds before trying again. Each re-try shall not
exceed 5 seconds, for preserving battery power
NOTE: Allow a brief warm-up after starting a cold engine
(about 1-2 minutes), in mountains and cold areas, prolong the
warm-up (about 3-5 minutes), for facilitating engine operation and
a trouble-less riding.
36
CAUTION
After starting, allow the engine oil to circulate
before riding your scooter. Allow sufficient idling
time after warm or cold engine start-up before
applying load or reviving the engine. This allows
time for the lubricating oil to reach all the critical
engine components.
1
1
To Next Page
Loading...
