Draining the V-belt compartment
If water leaks into V-belt compartment such as
when the machine is drive in water, remove the
drain screw on the bottom of compartment and
drain the water. Be sure to drive slowly until the
V-belt becomes dry. If slipping is noticed, ask a
KYMCO dealer to inspect.
Cable inspection and lubrication
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer
covering of control cables becomes
damaged.
Cables can also become frayed or kinked.
Operation of controls could be restricted,
which could cause an accident or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace
damaged cables.
Lubricate the inner cables and the cable ends. If
the cables do not operate smoothly, ask a
KYMCO dealer to replace them.
Recommended lubricant:
KYMCO chain and cable lube or
SAE 10W40 motor oil
125
(1) Drain bolt
WARNING
(1)
To Next Page
Loading...
Need help?
General
