Coolant temperature warning lamp
When the coolant temperature reaches a
specified level, this light comes on to warn that
the coolant temperature is too hot. If the light
comes on during operation, stop the engine as
soon as it is safe to do so and allow the engine to
cool down for about 10 minutes.
Coolant temperature warning lamp checking
methed
Turn the ignition to " "
and the engine stop
switch " "
．
Coolant temperature
warning lamp comes on
momentarily.
Coolant temperature
and electrical circuit
are OK. Go ahead with
riding.
Coolant temperature
warning lamp does not
come on.
Ask a KYMCO dealer to
inspect the electrical
circuit.
1. The engine may overheat if the ATV is
overloaded. If this happens, reduce the
load to specification.
2. Restart after making sure that the light is
out. Continuous use while the light is on
may cause damage to the engine.
CAUTION:
19
To Next Page
Loading...
Need help?
General
