The engine can be started only when the
drive select lever is in neutral.
When the select lever is in neutral, the
neutral indicator light should come on. If the
light does not come on, ask a KYMCO dealer
to inspect it.
5. Use the starter (choke) in reference to the
figure:
Position :Cold engine start-ambient
temperature below 5C (40F).
Position :Cold engine start-ambient
temperature at 0C (30F)~30C(90F)
and warming up position.
Position :Cold engine start-ambient
temperature above 25C(80F) and
warm engine start position.
6. Completely close the throttle lever and start
the engine by pushing the start switch.
45
NOTE:
1. Fully open
3. Closed
2. Half open
a. Starter (choke)
To Next Page
Loading...
Need help?
General
