To Next PageTo Next Page
Need help?Do you have a question about the KYMCO MXU700i and is the answer not in the manual?
General| Brand | KYMCO |
|---|---|
| Model | MXU700i |
| Category | Offroad Vehicle |
| Language | English |
Details specific warning and specification labels applicable to T3b model ATVs.
Describes the location and function of the key identification number for the ATV.
Provides space to record key, frame, and engine serial numbers for parts ordering.
Indicates the location on the vehicle where the engine serial number is stamped.
Specifies the location on the vehicle where the frame number is stamped.
Illustrates and identifies various external parts of the ATV.
Explains the functions of the OFF and ON positions of the ignition switch.
Details the various instruments and indicator lights on the ATV dashboard.
Describes the functions of switches located on the left handlebar.
Explains the operation of the winch control switch for cable in/out.
Information on the Electric Power Steering system and its operation.
Details the 2WD/4WD select button and differential lock switch.
Explains the operation and safety precautions for the thumb-operated throttle lever.
Describes the function and adjustment of the speed limiter for throttle control.
Information on operating the front brake lever, rear brake lever, and brake pedal.
Instructions for setting and releasing the front and rear parking brakes.
Procedure for locking and unlocking the ATV's steering handlebar.
Explains how to shift the drive select lever through L, H, N, R, and P positions.
Ensuring the fuel tank cap is tightened securely after refueling.
Guidance on inspecting, cleaning, and replacing the spark plug.
How to check the ATV's battery voltage for proper operation.
Instructions for removing and installing the rider and passenger seats.
Information about mounting an optional flag pole for increased visibility.
Location and use of the trailer hitch for towing.
Details the locations and uses of the ATV's various storage compartments.
Instructions for using the 5V/2.1A accessory socket for power.
Information on the trailer socket wiring for vehicle lighting.
Procedure for checking the drive select lever for proper operation.
Instructions for checking brake fluid leakage, levers, and pedal operation.
Guidance on checking fuel level and recommended fuel type.
Checking the drive shaft boots for damage or leaking grease.
Instructions for checking engine oil level and quantity.
Procedure for checking the oil level in the rear gear case.
Procedure for checking the oil level in the front gear case.
Checking the throttle lever for correct operation and spring-back.
Checking the tightness of chassis fittings and fasteners before riding.
Checking the headlight and taillight for proper working condition.
Checking the operation of various switches like headlight and engine stop.
Explains the function of the battery cut off switch for electrical circuits.
Information on approved tire sizes and recommended tire pressures.
Guidance on using the low-pressure tire gauge to check tire pressure.
Specifies the tire groove depth at which tires should be replaced.
Checking the coolant level in the reservoir and maintenance recommendations.
Step-by-step procedure for starting the ATV engine when it is cold.
Procedure for starting the ATV engine when it is already warm.
Instructions on shifting the drive select lever between neutral, high, and low.
Recommended procedures for breaking in a new engine for optimal life.
Guidelines for safely parking the ATV, including use of parking brakes.
Important considerations when choosing, mounting, and using accessories.
Information on maximum load capacities for cargo racks and towing.
Provides general instructions and skills for recreational ATV riding.
Emphasizes the need for training, practice, and good judgment while riding.
Age restrictions for operating the ATV, with specific warnings for younger riders.
Prohibits carrying passengers on the cargo racks due to balance and control risks.
Recommends essential protective apparel for ATV operation.
Warns against operating the ATV while under the influence of alcohol or drugs.
Lists essential pre-ride checks for safety and proper machine care.
Advises riding at speeds appropriate for skill level, terrain, and conditions.
Guidelines and precautions for carrying cargo and using accessories.
Warnings against improper modifications that could affect vehicle safety.
Emphasizes maintaining proper posture with hands on handlebars and feet on footboards.
Caution regarding the hot exhaust system and burn prevention.
Tips for practicing basic ATV control techniques in a safe area.
Provides techniques for safely cornering and turning the ATV.
Techniques for safely climbing slopes, including weight transfer and terrain checks.
Guidance on safely descending slopes, including braking and weight distribution.
Procedure for safely parking the ATV, including engaging brakes and ignition.
Troubleshooting common riding issues like inability to turn or climb.
Details the contents and storage location of the ATV's tool kit.
Provides a maintenance schedule based on mileage intervals.
Instructions for checking the engine oil level using the inspection window.
Step-by-step guide for draining oil and replacing the oil filter cartridge.
Procedure for changing the oil in the rear gear box case.
Procedure for changing the oil in the front gear box.
Guidance on inspecting spark plug gap, condition, and tightening torque.
Instructions for cleaning the spark arrester assembly.
Detailed steps for cleaning the air filter element and housing.
Procedure for cleaning the drain tube of the air cleaner housing.
How to check and adjust the engine's idle speed using a tachometer.
Steps for adjusting the throttle lever free play for optimal response.
Information on the importance of valve clearance adjustment by a technician.
Procedure for checking and replacing front brake pads when worn.
Procedure for checking and replacing rear brake pads when worn.
How to check the brake fluid level in the reservoir.
Checking the coolant level in the reservoir and recommended coolant mixture.
Troubleshooting common issues that may cause difficult steering.
Steps to take and precautions when the ATV engine overheats.
Instructions for removing and installing the ATV wheels.
Information on battery care, safety precautions, and replacement.
Procedure for replacing blown fuses in the fuse box.
Guidance on adjusting the ATV's headlight beam aim.
Checking the drive shaft boots for holes or tears.
Instructions for inspecting, lubricating, and replacing control cables.
Provides a quick procedure for checking common operational problems.
Detailed steps for cleaning the ATV to maintain appearance and performance.
Precautions to take when washing the ATV to protect the EPS system.
Steps to follow for storing the ATV for extended periods to prevent deterioration.
Technical specifications including dimensions, engine details, and tire sizes.
Information regarding tampering with noise control systems.
A log for recording scheduled maintenance services and dates.
