9-3
H. Remove the seat and clean and dry the under-seat
compartment, plus any components that may be dirty or
wet.
I. Clean the seat with vinyl upholstery cleaner to keep the
cover pliable and glossy.
J. Automotive type wax can be applied to all painted and
chrome plated surfaces. Avoid combination
cleaner-waxes as they may contain abrasives which may
mar the paint or protective finish.
K. When finished, start the engine and allow it to idle for
several minutes to evaporate any residual moisture.
POTENTIAL HAZARD
Operating your ATV with wet brakes after washing.
WHAT CAN HAPPEN
Wet brakes will reduce stopping ability that can increase the
chance of incident.
HOW TO AVOID THE HAZARD
Test the brakes after washing. Apply the brakes several times
at slow speeds to let friction dry out the brake pads and rotors.
To Next Page
Loading...
