6-2
(1) Set the parking brake and unlock the steering (take
steering lock key out).
(2) Turn the ignition switch to "ON".
(3) Shift the drive select lever into the neutral or park
position.
(4) Checking the battery voltage if the cold engine
start-ambient temperature below -18 C (0 F).
NOTE
The engine can be started in any gear if the brake lever is
applied. However, it is recommended to shift into neutral
or park before starting the engine.
When the select lever is in the neutral or park position, if
either indicator light does not come on, ask a KYMCO
dealer to inspect its electric circuit.
(5) Completely close the throttle lever and start the engine
by pushing the start switch.
To Next Page
Loading...
