Need help?Do you have a question about the Kymeta u7 Series and is the answer not in the manual?
General| Frequency Band | Ku-band |
|---|---|
| Beam Steering | Electronic |
| Connectivity | Wi-Fi |
| Technology | Metamaterials |
| Polarization | Linear |
| Transmit Frequency | 14.0 - 14.5 GHz |
| Receive Frequency | 10.7 - 12.75 GHz |
| Tracking Accuracy | < 0.2° RMS |
| Antenna Type | Electronically Steered Array |
Details the I/O box component, its functions, and user interface elements.
Discusses the modem component and its environmental installation requirements.
Describes the ODU interface cable, its connectors, and function.
Explains the TX cable, its frequency range, and connection details.
Details the RX cable, its function, frequency range, and power delivery.
Covers the LNB-to-antenna cable, its connector type, and length.
Explains the Ethernet cable used for M&C port and protocols.
Lists the contents for the u7 terminal in configuration 1 packaging.
Details the components included in the u7 terminal configuration 2 packaging.
Provides step-by-step instructions for packaging the u7 terminal (configuration 1).
Outlines the procedure for packaging the u7 terminal in configuration 2.
Details the steps for properly packaging the u7 terminal IDU unit.
Lists hardware components and quantities for BUC replacement.
Details hardware components and quantities required for LNB replacement.
Specifies hardware components and quantities for diplexer replacement.
Instructions for removing and mounting the antenna plate with RF chain.
Procedure for removing and installing the BUC component.
Steps for removing and mounting the LNB component.
Guide for removing and mounting the diplexer component.
To Next Page
