Kyocera 9002i User Manual

5-37
Using Convenient Fax Functions > Using a Connected Telephone
Using a Connected Telephone
It is possible to connect a telephone (a commercially available item) to this machine and use various functions.
FAX/TEL Auto Switch Reception
This reception method is convenient when using both telephone and fax on a single telephone line. When fax originals
have been sent, the machine automatically receives them, and when the other party is calling from a telephone,
the machine makes a ringing tone urging the user to respond.
Flow of reception
IMPORTANT
In order to use FAX/TEL Auto Switch Reception, it is necessary to connect a
telephone set (commercially available product) to the machine.
After the telephone has made a ringing tone for the preset number of times, the other
party is required to pay phone line charges even if the receiving system does not respond.
FAX FAX Telephone
When the other party has sent
originals with automatic send
When the other party has sent
originals with manual send
When the other party is calling
from a telephone
Receives incoming call without making ringing tone.
(The other party is required to pay the phone line charge from this point.)
Makes ringing tone twice.
(Only the other party can hear the ringing tone.)
Receive originals from the other
party automatically (FAX
Automatic Reception)
Makes ringing tone. (Both the other party and the receiving
machine can hear the ringing tone.)
(If you do not lift the handset within 30 seconds, the machine
switches to fax reception.)
When you lift the handset of the connected telephone set, you can
talk to the other party.
After the end of the
conversation, you can receive
faxes by using the Remote
Switch Function.
NOTE
At the end of the conversation, you can also receive faxes by using the Remote Switch Function.
Remote Switch Function (page 5-45)

Kyocera 9002i Specifications

General

Brand	Kyocera
Model	9002i
Category	Fax Machine
Language	English