3-161
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
70
Re-attach the front right cover.
71
Fasten left lock hasp [A] (screw x2: M4x8) to the door. Fasten right lock hasp [B] to
the door frame (screw x2: M3x6).
72
Connect the power cord [A] to the right rear lower side of the unit.
73
Secure the power cord with the clamp [A]. (screw x1, harness clamp x1)
• In Taiwan or Australia, do not use the power cord provided with this option. Contact your supervisor and use
the power cord specified for use in Taiwan or Australia.
To Next Page
Loading...
