Kyocera ECOSYS FS-3140MFP Technical Reference Manual

Chapter 3
Macros
After you have gone to the trouble of creating (and debugging) a PRESCRIBE command
sequence, it is inefficient to use it only once, but it is a nuisance to type the same
sequence repeatedly. The solution is to make the sequence into a macro. Then you can
execute the entire sequence with a single CALL command. The procedure for defining a
macro command sequence is simple.
Step 1:Assign a name to the sequence. Place the name at the top of the sequence (ending
with a semicolon).
Step 2:Add the PRESCRIBE command MCRO in front of the name.
Step 3:Add the PRESCRIBE command ENDM at the end of the sequence.

Kyocera ECOSYS FS-3140MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB 2.0, Ethernet
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Monthly Duty Cycle	200, 000 pages
Memory	512 MB
Weight	22 kg