Package weight<GS>
>
.
of format: <RS>
EOT>
s already mentioned, this must be followed directly by an escape sequence
Example of a MaxiCode request with primary and secondary information and
<Esc>(s24800T1,1,2,40670,840,001,[)><RS>01<GS>961Z00004951<GS>U
H<GS>DE<RS><EOT><Esc>(10U><Esc>(s1p11vsb414
Detailed explanation relative to this example:
1 = No. of symbol
1 = Number of symbols in this group
2 = MaxiCode mode
40670 = Postal code
840 = Country code
001 = Service class
1Z00004951 = Tracking number
USPN = SCAC
06X610 = UPS Shipper number
159 = Julian day of pickup
Address validation<GS
Ship to address<GS>
Ship to city<GS>
Ship to state<GS>
3
End
End of transmission <
A
that requests a font.
subsequent font request sequence:
SPN<GS>06X610<GS>159<GS>1234567<GS>1/1<GS>10<GS>Y<GS>OTT
O-HAHN-STRASSE
12<GS>MEERBUSC
8T
50
To Next Page
Loading...
Need help?
General