Kyocera ECOSYS M2035dn

8-56
Default Setting (System Menu)
Use the procedure below to set the default file name.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the  or  key to select [File Name Entry].
6 Press the OK key. File Name Entry appears. Enter the
document name (up to 32 characters).
7 Press the OK key. Additional Info appears.
8 Press the  or  key to select [None], [Date], [JobNo.],
[JobNo. + Date] or [Date + JobNo.].
9 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
File name Entry: A b
doc 1
*
S
ABC
[ Text ]
Additional Info.: a b
3 Job No.
*********************
5 Date+Job No.
4 *Job No.+Date