8
8-57
Default Setting (System Menu)
Subject/Body
Set the subject and body automatically entered (default subject and body) when sending the scanned originals by E-mail.
NOTE:
• Refer to
Send as E-mail on page 3-19
.
• Refer to
Character Entry Method on Appendix-5
for details on entering characters.
Use the procedure below to set the default e-mail subject and message body.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [Common Settings].
2
Press the
OK
key. The Common Settings menu appears.
3
Press the
or
key to select [Function Default].
4
Press the
OK
key. The Function Default menu appears.
5
Press the
or
key to select [Subject/Body].
6
Press the
OK
key. Subject Entry appears. Enter the e-
mail subject (up to 60 characters).
If you press the Back key, you can return to the Function
Default menu.
7
Press the
OK
key. Body Entry appears. Enter e-mail
body text (up to 500 characters).
If you press the Back key, you can return to Subject
Entry.
8
Press the
OK
key.
Completed.
is displayed and the
screen returns to the Function Default menu.
To Next Page
Loading...
