Kyocera ECOSYS M3145dn - Page 276

8-16
Setup and Registration (System Menu) > System Menu
Secure Settings
eSCL over SSL Selects whether to receive scanned documents using eSCL over SSL.
*1, *3
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [eSCL over SSL] is set to [On].
Wi-Fi
*2
Wired Network
REST Select whether to use REST. When selecting [On], specifies the port number used. The default
port number is 9080.
*1
Value: Off, On (Port Number: 1 to 32767)
NOTE
This function is displayed when [REST] is set to [On].
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [REST] is set to [On].
Wi-Fi
*2
Wired Network
REST over SSL Select whether to use REST secured by SSL. When selecting [On], specifies the port number
used. The default port number is 9081.
*1, *3
Value: Off, On (Port Number: 1 to 32767)
NOTE
• This function is displayed when [REST over SSL] is set to [On].
• When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [REST over SSL] is set to [On].
Wi-Fi
*2
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 Displayed only when the wireless network function is available on the machine.
*3 Set "SSL" to [On] in Secure Settings.
Secure Settings
(page 8-16)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SSL Select whether or not to use SSL.
Value: Off, On
Item Description