Kyocera ECOSYS M3145idn

6-24
Using Various Functions > Functions
Continuous Scan
Scans a large number of originals in separate batches and then produce as one job.
Originals will be scanned continuously until you select [Finish Scan].
(Value: [Off] / [On])
Job Finish Notice
Sends E-mail notice when a job is complete.
Users can be notified of the completion of a job while working at a remote desk, saving the time spent waiting beside the
machine to finish.
NOTE
PC should be configured in advance so that E-mail can be used.
Command Center RX (page 2-53)
E-mail can be sent to a single destination.
Item Description
Off Disables the function.
Job Finished Only,
Job Finished + Job Interrupted
Displays the destination list.
Add a Destination
To add a new destination, select [ ].
• Address Book: Select the notification destination from the address book and select [OK].
• Ext. Address Book
*1
: Select the notification destination from the external address book.
• Address Entry: Enter the e-mail address directly. Enter the address (up to 256 characters)
and select [OK].
• My Address
*2
: Uses the e-mail address of the logged in user.
*1 For details on the External Address Book, refer to the following:
Command Center RX User Guide
*2 Displayed when user login administration is enabled.
Check the Destination
To display details for the destinations, select [ ].
Delete the Destination
To delete the selected destination, select [ ].
Copy
Send
Scan to
Box
Scan to
USB
1~10
1
1~30
1
11~20
11
21~30
21
Copy
Print from
Box
Print from
USB
Send
Send from
Box
Scan to
Box
Scan to
USB