Kyocera ECOSYS M3145idn

8-34
Setup and Registration (System Menu) > System Menu
IPP -
Protocol Setting Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX.
*1
Value: Off, On
Port Number Set the IPP default Port Number. The default port number is 631.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
IPP over SSL -
Protocol Setting Select whether or not to use IPP over SSL.
*1, *3
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Port Number Set the IPP over SSL default Port Number. The default port number is 443.
*1
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
Raw Port -
Protocol Setting Select whether to receive documents using Raw Port.
*1
Value: Off, On
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
Item Description