8-19
Setup and Registration (System Menu) > System Menu
Display Status/Log
[System Menu/Counter] key > [Common Settings] > [Display Status/Log]
Remote Printing
[System Menu/Counter] key > [Common Settings] > [Remote Printing]
Function Key Assignment
[System Menu/Counter] key > [Common Settings] > [Function Key Assignment]
Assigns a function to each function key.
Show Power Off Message
[System Menu/Counter] key > [Common Settings] > [Show Power Off Message]
Item Description
Display Status/Log Set the display method of the Status/Log.
Display Jobs Detail
Status
Value: Show All, My Jobs Only, Hide All
Display Jobs Log Value: Show All, My Jobs Only, Hide All
Display FAX Log
*1
*1 Only on products with the fax function installed.
Value: Show All, Hide All
Item Description
Remote Printing Select whether to prohibit printing that is performed without operating the machine. When
[Prohibit] is selected, a document that has been stored in the document box from the printer
driver can be printed from the machine. This prevents another person from seeing that
document.
Value: Permit, Prohibit
If [Prohibit] is selected, printing and storing using Quick Copy and Proof and Hold functions
are disabled. Printing a received FAX is not prohibited.
Item Description
Function Key 1 Value: None, Copy, Send, FAX Server
*1
, FAX
*2
, Custom Box
*3
, Job Box,
Removable Memory, Sub Address Box
*2
, Polling Box
*2
, FAX Memory RX Box
*2
,
Send to Me (E-mail), Send to Me (Folder), ID Card Copy, Paper Saving Copy,
Simple Folder Send (Destination Entry), Simple Folder Send (Address Book),
Simple Email Send (Destination Entry), Simple Email Send (Address Book),
Application
*4
You can select the function to display by selecting [Menu] > [Narrow Down] or from the pull-
down menu, by selecting [All], [Application], [Favorites], [Others] to display the function.
*1 Displayed when the external server (FAX server) is set.
*2 ECOSYS M3645idn/ECOSYS M3655idn/ECOSYS M3660idn only
*3 Displayed when the product is equipped with an optional large capacity storage device (SSD).
*4 The registered application name is displayed.
Function Key 2
Function Key 3
*2
Item Description
Show Power Off Message Set the mode whether display a confirmation message in power supply off.
Value: Off, On