5-30
Operation on the Machine > Send to Me (Folder)
Send to Me (Folder)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
Sending a document to the folder of the logged in
user
1
In the basic screen for sending, select [▲] [▼] key >
[Me(Folder)] > [OK] key
NOTE
• To use this function, user control must be set to network authentication and the folder of the user must be registered
in the network authentication server.
• For the procedure for setting a folder, check with the administrator for network authentication server users.
NOTE
If the folder is not registered in the network authentication server, the scanned document
cannot be sent to the folder.
To Next Page
Loading...
