5-24
Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
5
Check the information
1 Check the information.
Change the delay as required.
2 Select [Connection Test] to check the connection.
"Connected." appears when connection to the destination is correctly established. If "Cannot connect." appears,
review the entry.
To enter multiple destinations, select [Next Destination] and enter the next destination.
You can register the entered information in the Address Book by selecting [Add to Address Book].
6
Select [OK].
Destinations can be changed later.
7
Configure the functions.
Select the Global Navigation to display other functions.
8
Press the [Start] key.
Sending starts.
If [Prohibit] is set to “Broadcast”, multiple destinations cannot be entered.
Broadcast (page 8-29)
Confirmation Screen of Destinations (page 5-40)
Send (page 6-4)
To Next Page
Loading...
