9-49
User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
1
Display the screen.
1 [Home] key > [...] > [System Menu] > [Job Accounting/Authentication]
2 "Job Accounting Setting" [Job Accounting Setting] > "Default Setting" [Apply Limit]
2
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only].
Item Descriptions
Immediately
*1
*1 The next job will be prohibited in sending or in storing in the box.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
If the User Authentication screen appears, log in with a user who has the privilege to configure this setting. If
you do not know your login User Name or Password, please contact your Administrator.
To Next Page
Loading...
