Kyocera ECOSYS MA4500ix - Page 391

8-42
Setup and Registration (System Menu) > System Menu
TCP/IP Setting
Item Description
TCP/IP
Select whether to use TCP/IP Protocol.
Value: Off, On
IPv4 Settings
Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is
set to [On].
DHCP
Select whether to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP
Select whether to use Auto-IP.
Value: Off, On
IP Address
Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
Subnet Mask
Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
Default Gateway
Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
DNS Server Address
Set the IP address of DNS (Domain Name System) server.
Value: Use DNS Server from DHCP, Use following DNS Server
NOTE
When [Use following DNS Server] is selected, you can enter static DNS server
information in the Primary and Secondary fields provided.
DNS over TLS
Set whether to connect to a DNS server during communication protected by TLS.
Value: Off, On, Auto
IMPORTANT
• When setting the Auto-IP, enter "0.0.0.0" in [IP Address].
• After changing the setting, restart the network or turn the machine OFF and then ON.