8-41
Setup and Registration (System Menu) > System Menu
Push Button Method
If the access point supports the push button method, wireless settings can be configured using
the push button. This setting executes push button, and the connection is started by pressing
the push button on the access point.
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access point. The
PIN code of the machine is automatically generated.
Custom Setup
The detailed settings for wireless LAN can be changed.
Network
Name (SSID)
Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects.
Up to 32 characters can be entered.
Network
Authentication
Select network authentication type.
Value: Open, WPA2/WPA-PSK, WPA2-PSK, WPA2/WPA-EAP, WPA2-EAP,
WPA3-SAE/WPA2-PSK, WPA3-SAE, WPA3/WPA2-EAP, WPA3-EAP
Encryption
Select encryption method. The setting values vary depending on the Network Authentication
setting.
Value
WPA2/WPA-PSK
AES, Auto, Preshared Key (Up to 64 characters)
WPA2-PSK
Preshared Key (Up to 64 characters)
WPA2/WPA-EAP
AES, Auto
WPA2-EAP
—
WPA3-SAE/WPA2-PSK
Preshared Key
WPA3-SAE
Preshared Key
WPA3/WPA2-EAP
—
WPA3-EAP
—
Item Description
To Next Page
Loading...
