Operation Panel
4-102
Format SD Card (Formatting the SD card)
The printer is equipped with a slot for an SD card.
A SD card must be formatted before it can be used in the printer. Formatting allows data to be written to the SD card.
When a new SD card is inserted in the printer's slot, Format SD Card will appear on the message display.
1 In the Device Common menu, press or to select Format SD
Card.
2 Press [OK]. A confirmation screen appears.
3 Press [Yes] ([Left Select]). The Formatting SD card...
screen appears and SD card formatting begins. Once the formatting
ends, the standby screen reappears.
Pressing [No] ([Right Select]) returns to the Device Common
menu without formatting the SD card.
Display Bright. (Display brightness setting)
Sets the brightness of the message display.
1 In the Device Common menu, press or to select Display
Bright..
2 Press [OK]. The Display Bright. screen appears showing the
available brightness settings.
The list shows the following brightness settings:
Darker -2
Darker -1
Normal 0
Lighter +1
Lighter +2
3 Press or to select the desired brightness.
4 Press [OK]. The brightness is set and the Device Common menu
reappears.
Note Formatting will destroy any existing data on a storage device including a used SD card.
Formatting of the SD card must be executed from the printer.
Format.
Are you sure?
Yes
No
SD Card
Display Bright.:
Darker -2
01
Darker -1
02
*Normal 0
03
To Next Page
Loading...
