Kyocera ECOSYS P3045dn - Op Functions (Optional Application Settings)

Operation Panel
4-154
Op Functions (Optional application settings)
You can use the optional applications installed on this machine.
Application
The applications listed below are installed on this machine.
• DATA SECURITY (Data Security Kit(E))
• ID Card (Card Authentication Kit(B))
• UG-33 (ThinPrint)
There are also some applications that can be used for a limited trial period.
The options available in Op Functions menu are as follows:
• Starting Application Use...4-154
• Checking Application Details...4-156
Starting Application Use
Use the procedure below to start using an application.
1 Press [Menu].
2 Press  or  to select Op Functions.
3 Press [OK]. The Login screen appears.
4 With the Login User Name entry field selected, press [OK]. The
Login User Name entry screen is displayed.
5 Enter the Login User Name using the numeric keys then press [OK].
The log in screen reappears.
Note Restrictions such as the number of times the application can be used during the trial period differ depending
on the application.
Login User Name:
Login
Login Password:
Note When user login administration is set:
• When logged in as an administrator, the log in screen is
not displayed and the Op Functions menu screen is
displayed.
• The setting is not possible when logged in as anyone other
than an administrator. Log in again as an administrator.
Login User Name:
Text
ABC
Note The initial setting for the administrator's Login User
Name is set as shown below.
ECOSYS P3045dn: 4500
ECOSYS P3050dn: 5000
ECOSYS P3055dn 5500
ECOSYS P3060dn: 6000.
For details on entering characters, refer to Character Entry
Method on page A-2.