Kyocera ECOSYS P3050dn

4-117
Operation Panel
Disp. Status/Log (Display Status/Log setting)
Set the display method of the Status/Log.
1 In the Device Common menu, press  or  to select Disp.
Status/Log.
2 Press [OK]. The Login screen appears.
3 With the Login User Name entry field selected, press [OK]. The
Login User Name entry screen is displayed.
4 Enter the Login User Name using the numeric keys then press [OK].
The log in screen reappears.
5 Press  or  to select the Login Password entry field.
6 Press [OK]. The Login Password entry screen is displayed.
Login User Name:
Login
Login Password:
Note When user login administration is set:
• When logged in as an administrator, the log in screen is
not displayed and the Disp. Status/Log menu screen
is displayed.
• The setting is not possible when logged in as anyone other
than an administrator. Log in again as an administrator.
Login User Name:
Text
ABC
Note The initial setting for the administrator's Login User
Name is set as shown below.
ECOSYS P3045dn: 4500
ECOSYS P3050dn: 5000
ECOSYS P3055dn: 5500
ECOSYS P3060dn: 6000
For details on entering characters, refer to Character Entry
Method on page A-2.
Login User Name:
Login
Login Password:
6000
Login Password:
Text
ABC