2T6/2T7/2T8/2T9
1-3-23
MC Setting main charger output
Description
Sets the main charger output.
Execution is possible only when the altitude adjustment mode is set to [Normal].
Purpose
Execute when the image density declines, dirt of a background or an offset has
occurred.
Method
1. Enter the Service Setting menu.
2. Select [MC] using the cursor up/down keys.
3. Press the OK key.
4. Select [1] to [7] using the cursor up/down keys.
5. Press the OK key. The setting is set.
Service items Description
To Next Page
Loading...
