Kyocera ECOSYS P6021cdn Service Manual

2KT/2KV
1-5 Assembly and disassembly
1-5-1 Precautions for assembly and disassembly........................................................................... 1-5-1
(1) Precautions....................................................................................................................... 1-5-1
(2) Drum.................................................................................................................................1-5-1
(3) Toner ................................................................................................................................ 1-5-1
(4) How to tell a genuine Kyocera Mita toner container ......................................................... 1-5-2
1-5-2 Outer covers ..........................................................................................................................1-5-3
(1) Detaching and refitting the top cover................................................................................1-5-3
(2) Detaching and refitting the right rear cover, right cover and right lower cover ................. 1-5-5
(3) Detaching and refitting the left rear cover, left cover and left lower cover........................ 1-5-8
(4) Detaching and refitting the inner cover........................................................................... 1-5-10
1-5-3 Paper feed section............................................................................................................... 1-5-12
(1) Detaching and refitting the retard roller unit ................................................................... 1-5-12
(2) Detaching and refitting the paper feed roller unit............................................................1-5-14
(3) Detaching and refitting the MP paper feed roller ............................................................ 1-5-16
1-5-4 Developing section ..............................................................................................................1-5-18
(1) Detaching and refitting the developing unit .................................................................... 1-5-18
1-5-5 Drum section ....................................................................................................................... 1-5-20
(1) Detaching and refitting the drum unit..............................................................................1-5-20
1-5-6 Transfer/Separation section ................................................................................................1-5-21
(1) Detaching and refitting the intermediate transfer unit..................................................... 1-5-21
(2) Detaching and refitting the transfer roller unit.................................................................1-5-24
1-5-7 Fuser section ....................................................................................................................... 1-5-25
(1) Detaching and refitting the fuser unit.............................................................................. 1-5-25
1-5-8 PWBs................................................................................................................................... 1-5-26
(1) Detaching and refitting the engine PWB......................................................................... 1-5-26
(2) Detaching and refitting the power source PWB.............................................................. 1-5-28
(3) Detaching and refitting the main PWB............................................................................ 1-5-29
(4) Detaching and refitting the high voltage PWB ................................................................ 1-5-34
1-5-9 Drive section........................................................................................................................ 1-5-35
(1) Detaching and refitting the MP feed drive unit................................................................ 1-5-35
(2) Detaching and refitting the drum/developing drive unit .................................................. 1-5-36
(3) Detaching and refitting the paper feed drive unit............................................................ 1-5-38
(4) Detaching and refitting the fuser pressure drive unit ...................................................... 1-5-39
(5) Detaching and refitting the middle transfer drive unit ..................................................... 1-5-41
1-5-10 Optical section ..................................................................................................................... 1-5-43
(1) Detaching and refitting the laser scanner unit ................................................................ 1-5-43
1-5-11 Others .................................................................................................................................. 1-5-46
(1) Detaching and refitting the paper conveying unit ........................................................... 1-5-46
(2) Detaching and refitting the operation panel.................................................................... 1-5-48
(3) Detaching and refitting the power source inlet ............................................................... 1-5-49
(4) Direction of installing the principal fan motors ................................................................ 1-5-51
1-6 Requirements on PWB Replacement
1-6-1 Upgrading the firmware ......................................................................................................... 1-6-1
1-6-2 Remarks on engine PWB replacement ................................................................................. 1-6-2
2-1 Mechanical Construction
2-1-1 Paper feed/conveying section ............................................................................................... 2-1-1
(1) Cassette paper feed section (21/23 ppm model)..............................................................2-1-1
(2) Cassette paper feed section (26/28 ppm model)..............................................................2-1-2
(3) MP tray paper feed section............................................................................................... 2-1-4
(4) Paper conveying section .................................................................................................. 2-1-6

Kyocera ECOSYS P6021cdn Specifications

General

Color	Yes
Print technology	Laser
Maximum resolution	600 x 600 DPI
Duplex printing mode	Auto
Time to first page (black, normal)	10.5 s
Print speed (black, normal quality, A4/US Letter)	21 ppm
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	50000 pages per month
Number of print cartridges	4
Page description languages	Microsoft XPS, PCL 5c, PCL 6, PCL XL, PDF 1.7, PostScript 3
Paper input type	Cassette, Paper tray
Total input capacity	550 sheets
Total output capacity	- sheets
Maximum input capacity	1300 sheets
Total number of input trays	2
Multi-Purpose tray input capacity	50 sheets
Custom media width	70 - 216 mm
Maximum print size	216 x 356 mm
Custom media length	148 - 356 mm
Paper tray media types	Plain paper
Paper tray media weight	60 - 163 g/m²
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Wi-Fi	No
Mobile printing technologies	-
Standard interfaces	Ethernet, USB 2.0
Optional connectivity	Wireless LAN
Processor family	PowerPC
Maximum internal memory	1536 MB
Sound pressure level (printing)	48.2 dB
Display	LCD
Certification	TÜV/GS, CE
Product color	Black, White
Display number of lines	2 lines
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.1 W
Power consumption (standby)	61 W
Power consumption (printing)	353 W
Power consumption (PowerSave)	4 W
Mac operating systems supported	Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificates	Blue Angel, ENERGY STAR

Weight and Dimensions

Depth	523 mm
Width	390 mm
Height	370 mm