10-14
Troubleshooting > Troubleshooting
E
H
I
Cannot execute this job.
Restricted by
Authentication settings.
― This job is canceled because it is
restricted by Authentication
settings. Select [OK].
―
Check cassette #. ― Open and then close the indicated
cassette.
―
Close rear cover #. Is there any cover which is open? Close the cover indicated on the
screen.
―
Close the waste toner
cover.
Close top cover.
Color toner is empty.
Cannot print this
document.
― Replace the toner container using a
new toner kit for the particular color.
page 10-3
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear
(page 8-16)
Message Checkpoints Corrective Actions
Reference
Page
Error occurred.
Turn the power switch
off and on.
― System error has occurred. Turn the
main power switch OFF and then
ON.
―
Message Checkpoints Corrective Actions
Reference
Page
High temperature.
Adjust room temp.
— Adjust the temperature and the
humidity of your room.
―
Message Checkpoints Corrective Actions
Reference
Page
Incorrect account ID.
Press [OK].
*1
― The account ID was incorrect when
processing the job externally. The
job is canceled. Select [OK].
page 9-16
Incorrect ID. ― The administrator ID entered to
open the Security function or Job
Accounting menu is not correct.
Enter the correct administrator ID.
―
― The user ID entered for a private job
is not correct. Check the user ID
that you specified on the printer
driver.
page 4-10
page 4-12
Message Checkpoints Corrective Actions
Reference
Page