2. Make sure the toner port is closed.
Fill the cartridge with toner for use in the TK-142 series of cartridges.
Use a Samsung CLP-300 seal to cover the hole you drilled.
3. If shipping the cartridge, place a small strip of tape across
the toner port.
KYOCERA FS-1100 EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
To Next Page
Loading...
