2F8/2F9/2GA
1-2-8
4. Pull the release lever on the left side guide
and slide to the desired paper size.
Figure 1-2-10
5. Pull the release lever and slide the paper
stopper to the desired paper size.
When using non-standard size paper, move
the paper guides and paper stopper all the
way out, insert the paper, then adjust the
paper guides and paper stopper to the size
of the paper. Adjust them so that they are in
light contact with the paper.
6. Insert the paper cassette into the slot in the
printer. Push it straight in as far as it will go.
Figure 1-2-11
Side guide
Side guide
Release lever
Release leve
To Next Page
Loading...
