Kyocera FS-2000D - Using the Menu Selection System

2F8/2F9/2GA
1-3-1
1-3 Maintenance Mode
1-3-1 Maintenance mode
The printer is equipped with a maintenance function which can be used to maintain and service the machine.
(1) Executing a maintenance item
>>Developer
>>Drum
>>DRUM-CTRL
Ready
Print
Menu Map
Others >
>MSG Language
English
>Service >
>>Print
Status Page
>>Print
Event Log
>>Paper Feed
>>Maintenance
 Press the MENU key.
Message display
To print a status page for service purpose.
To print an event log (EVENT LOG)
(Displayed when FRPO I1 is set to 1)
To set paper feed operation as printer driver
priority mode.
To reset counter for the maintenance kit.
To initialize the developer unit. (toner install mode)
To perform a automatic drum refreshing.
To perform a drum refreshing.
 Press the  or  key several times
until [Others >] is displayed.
Service mode items
 Press the  key.
 Press the  key.
 Press the  or  key several times
until [>Service >] is displayed.
To scroll these items,
press the  or  key repeatedly.
(See page P.1-3-2)
(See page P.1-3-12)
(See page P.1-3-18)
(See page P.1-3-18)
(See page P.1-3-19)
(See page P.1-3-19)
(See page P.1-3-20)