15
Setup
4
Insert the toner developer in the appropriately labelled slot.
From top to bottom, the order of the colour toner developers is BLACK, CYAN,
MAGENTA, YELLOW.
Caution:
Excessive exposure to light will damage the imaging unit; do not leave the right side
door open for more than 1 minute. Close the right side door after replacing each
individual toner developer unit.
5
Repeat steps 1 to 4 for each toner developer.
When you have installed all the toner developers, go to step 6.
6
Close the right side cover.
To Next Page
Loading...
