20
Setup
■ Loading Paper
Notes:
• Reusing media that has been fed through the printer (for example, after jams) can
reduce the life of the consumables and paper path components.
• When printing legal size using the multi-purpose tray, backside marking may occur.
If this occurs, use the legal cassette.
For detailed information on media, refer to pages 111 and 114.
1
Set the media thickness switch ( ☞ P. 19).
2
(1)Open the Multi-purpose tray.
(2)Extend the media support by sliding it outward.
3
Separate the media guides to the approximate width of the media.
4
Fan the media, and then tap it on a level surface to avoid media
jams or skewed printing.
(1)
(2)
To Next Page
Loading...
