Kyocera FS-5900C - Page 89

76
Care and Maintenance
4
(1) Turn the fuser’s large green knob clockwise.
(2) Remove the jammed media.
5
(1) Replace the oil supply roll into the fuser.
(2) Press down firmly on the oil supply roll to snap both sides into
place.
Caution:
If the oil supply roll is not installed correctly, print quality will be diminished.
6
(1) Open the front cover.
(2) Slide the fuser back into the printer.
(2)
(1)
(1)
(2)
(2)
(1)
(2)