Installing the Page Printer
29
The description given below is intended for service personnel.
Precautions on the Handling of Extended SIMM
Static electricity which may accumulate in the human body through walking on carpets or other such
surfaces is the enemy of SIMM loaded with many semiconductor chips. Pay attention to the following
things before installation to protect memory chips against damage from static electricity.
•
Do not remove the SIMM from their anti-static bag until immediately prior to installation.
•
Eliminate any static electricity from your body through grounding before touching the SIMM.
•
Be absolutely sure when handling the SIMM to hold them by the substrate without touching the
printed connector section.
To Next Page
Loading...
