2-31
Chapter 2 Operating the Laser Printer
2.9. KIR Level
This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. KIR
provides high quality printing by providing a software-type improvement to the resolution.
Print a status page to find out the current printing mode.
Notes
● Set the print density to 03 when setting the KIR mode. For details on print density, see page
2-37.
● You can look at the check line, the last line on a KIR test page, to make the optimum KIR
mode setting. Refer to the table on the next page.
The KIR setting is Off
The KIR setting is On
(Default setting)
To Next Page
Loading...
