2-33
Chapter 2 Operating the Laser Printer
Selecting KIR Mode
1. Pressing the MODE key will put the printer in Mode Select mode.
2. Press + or – to select Others >.
3. Press the key.
4. Press the + or – key to display >KIR mode and then press the ENTER key. A ? will flash and
the current setting can be changed.
5. Press the + or – key and select the desired setting.
6. Press the ENTER key.
If you want to change the setting, press the CANCEL key before pressing the ENTER key.
7. Press the EXIT key. The KIR mode setting is now changed.
To Next Page
Loading...
