Kyocera FS-C1020MFP

9
L From the [System Preferences] menu, click [Quit System Preferences].
Connecting the machine via a network to Mac OS X 10.5 (IP Printer)
Use this procedure to connect the machine via a network to a computer running
Mac OS X 10.5.
A Connect the machine and the computer via network cable.
B From the Apple menu, select [System Preferences...].
C Under "Hardware", click [Print & Fax].
D Click the [+] (add) button in the lower left area of the [Print & Fax] dialog box.
E Click the [IP] icon in the menu.
F In the [Address], type the machine's IP address.
Select [LPD] for as the protocol, and leave the queue blank.
G If [Print Using:] shows the machine, click [Add], and then proceed to step
K
.
If the machine name is not shown, proceed to step
H
.
H Select [Select a driver to use...] for [Print Using:].
I In the search box, type the machine name.
A list of machines found appears under the search box.
J Select the machine from the list, and then click [Add].
K In the [Installable Options] dialog box, check the tray 2 configuration, and
then click [Continue].
L Check that the machine's IP address is shown in the [Print & Fax] dialog box.
M From the [System Preferences] menu, click [Quit System Preferences].