Using the Operator Panel
2-76 ADVANCED OPERATION GUIDE
4
Press Z.
5
Press U or V repeatedly until the message display shows the toner
container of the color you replaced — [C]yan, [M]agenta, [Y]ellow, or
blac[K]. For example, to reset the Cyan toner counter, display >New
Toner [C] Installed.
6
Press [OK] ([ENTER]). A question mark (?)
appears.
7
Press [OK] ([ENTER]). The toner counter is reset.
>New Toner [C]
Installed ?
To Next Page
Loading...
