Kyocera FS-C5015N User Manual

Using the Operator Panel
2-2 ADVANCED OPERATION GUIDE
General Information
This chapter provides the information you need to configure the Ecosys
Color printer. In general you need to use the operator panel only to make
default settings. You can make most changes to the printer settings using
the printer driver through the application software.
NOTE: Changes to printer settings made using a software application
override changes made using the operator panel.
You can also rely on other printer utilities such as KM-NET for Clients if you
need to change settings that are not available on the printer driver. It will
allow remote access to printer settings. Printer utilities are supplied in the
CD-ROM supplied with the printer.
The chapter describes the operator panel in detail, including its menus and
the procedures for changing various printer settings.

Kyocera FS-C5015N Specifications

General

I/O ports	USB 2.0
Power requirements	AC 220 ~ 240 V, 50/60 Hz
Standard media sizes	A 4, B 5, A 5, Letter, Legal, Custom (148 x 210 mm – 216 x 356 mm)
Power consumption (active)	452 W
Internal memory	128 MB
Processor model	PowerPC 750CXr
Built-in processor	Yes
Sound power level (standby)	36 dB
Sound pressure level (printing)	52 dB
Print technology	Laser
Maximum resolution	600 x 600 DPI
Time to first page (color, normal)	16 s
Print speed (black, normal quality, A4/US Letter)	16 ppm
Total input capacity	500 sheets
Total output capacity	250 sheets
Maximum input capacity	1000 sheets
Maximum duty cycle	50000 pages per month
Power consumption (standby)	173 W
Power consumption (PowerSave)	16 W
Certification	TÜV/GS, CE This product is manufactured according to ISO 9001 quality standard and ISO 14001 environmental standard.

Weight and Dimensions

Dimensions (WxDxH)	345 x 470 x 385 mm