Kyocera FS-C5015N - Selecting Monochrome or Color Printing

Using the Operator Panel
2-74 ADVANCED OPERATION GUIDE
Selecting Monochrome or Color Printing
You can use the Color Mode menu on the operator panel to select the
Monochrome or Color printing mode. By default, the printer is set to print
in color mode.
1
Press [MENU].
2
Press U or V repeatedly until Color Mode
appears.
3
To change color mode, press [OK]
([ENTER]). A blinking question mark (?)
appears.
4
Press U or V to change color mode — Color or Monochrome.
5
When the desired color mode is displayed, press [OK] ([ENTER]). Color
mode is changed.
6
To exit the menu selection, press [MENU].
Color Mode
Color
Color Mode
? Color